qpc/ports/arm-cm/qxk/iar/qf_port.h

/**
* @file
* @brief QF/C port to Cortex-M, preemptive dual-mode QXK kernel, IAR-ARM
* @cond
******************************************************************************
* Last Updated for Version: 6.3.7
* Date of the Last Update:  2018-12-12
*
*                    Q u a n t u m  L e a P s
*                    ------------------------
*                    Modern Embedded Software
*
* Copyright (C) 2005-2018 Quantum Leaps, LLC. All rights reserved.
*
* This program is open source software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
* by the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Alternatively, this program may be distributed and modified under the
* terms of Quantum Leaps commercial licenses, which expressly supersede
* the GNU General Public License and are specifically designed for
* licensees interested in retaining the proprietary status of their code.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Contact information:
* https://www.state-machine.com
* mailto:info@state-machine.com
******************************************************************************
* @endcond
*/
#ifndef qf_port_h
#define qf_port_h

/* The maximum number of active objects in the application, see NOTE1 */
#define QF_MAX_ACTIVE           32

/* The maximum number of system clock tick rates */
#define QF_MAX_TICK_RATE        2

/* QF interrupt disable/enable and log2()... */
#if (__ARM_ARCH == 6) /* Cortex-M0/M0+/M1(v6-M, v6S-M)? */

    /* Cortex-M0/M0+/M1(v6-M, v6S-M) interrupt disabling policy, see NOTE2 */
    #define QF_INT_DISABLE()    __disable_interrupt()
    #define QF_INT_ENABLE()     __enable_interrupt()

    /* QF critical section entry/exit (save and restore interrupt status) */
    #define QF_CRIT_STAT_TYPE   unsigned long
    #define QF_CRIT_ENTRY(primask_) do { \
        (primask_) = __get_PRIMASK(); \
        QF_INT_DISABLE(); \
    } while (0)
    #define QF_CRIT_EXIT(primask_) __set_PRIMASK((primask_))

    /* CMSIS threshold for "QF-aware" interrupts, see NOTE2 and NOTE4 */
    #define QF_AWARE_ISR_CMSIS_PRI 0

    /* hand-optimized LOG2 in assembly for Cortex-M0/M0+/M1(v6-M, v6S-M) */
    #define QF_LOG2(n_) QF_qlog2((n_))

#else /* Cortex-M3/M4/M7 */

    /* Cortex-M3/M4/M7 alternative interrupt disabling with PRIMASK */
    #define QF_PRIMASK_DISABLE() __disable_interrupt()
    #define QF_PRIMASK_ENABLE()  __enable_interrupt()

    /* Cortex-M3/M4/M7 interrupt disabling policy, see NOTE3/4/5 */
    #define QF_INT_DISABLE() do { \
        QF_PRIMASK_DISABLE(); \
        __set_BASEPRI(QF_BASEPRI); \
        QF_PRIMASK_ENABLE(); \
    } while (0)
    #define QF_INT_ENABLE()      __set_BASEPRI(0U)

    /* QF critical section entry/exit (save and restore interrupt status) */
    #define QF_CRIT_STAT_TYPE   unsigned long
    #define QF_CRIT_ENTRY(basepri_) do {\
        (basepri_) = __get_BASEPRI(); \
        QF_INT_DISABLE(); \
    } while (0)
    #define QF_CRIT_EXIT(basepri_) __set_BASEPRI((basepri_))

    /* BASEPRI threshold for "QF-aware" interrupts, see NOTE3 */
    #define QF_BASEPRI           0x3F

    /* CMSIS threshold for "QF-aware" interrupts, see NOTE5 */
    #define QF_AWARE_ISR_CMSIS_PRI (QF_BASEPRI >> (8 - __NVIC_PRIO_BITS))

    /* Cortex-M3/M4/M7 provide the CLZ instruction for fast LOG2 */
    #define QF_LOG2(n_) ((uint_fast8_t)(32U - __CLZ(n_)))

#endif

#define QF_CRIT_EXIT_NOP()      __ISB()

#include <intrinsics.h> /* IAR intrinsic functions */
#include "qep_port.h"   /* QEP port */

#if (__ARM_ARCH == 6) /* Cortex-M0/M0+/M1(v6-M, v6S-M)? */
    /* hand-optimized quick LOG2 in assembly */
    uint_fast8_t QF_qlog2(uint32_t x);
#endif /* Cortex-M0/M0+/M1(v6-M, v6S-M) */

#include "qxk_port.h" /* QXK dual-mode kernel port */
#include "qf.h"       /* QF platform-independent public interface */
#include "qxthread.h" /* QXK extended thread interface */

/*****************************************************************************
* NOTE1:
* The maximum number of active objects QF_MAX_ACTIVE can be increased
* up to 64, if necessary. Here it is set to a lower level to save some RAM.
*
* NOTE2:
* On Cortex-M0/M0+/M1 (architecture v6-M, v6S-M), the interrupt disabling
* policy uses the PRIMASK register to disable interrupts globally. The
* QF_AWARE_ISR_CMSIS_PRI level is zero, meaning that all interrupts are
* "QF-aware".
*
* NOTE3:
* On Cortex-M3/M4/M7, the interrupt disable/enable policy uses the BASEPRI
* register (which is not implemented in Cortex-M0/M0+/M1) to disable
* interrupts only with priority lower than the threshold specified by the
* QF_BASEPRI macro. The interrupts with priorities above QF_BASEPRI (i.e.,
* with numerical priority values lower than QF_BASEPRI) are NOT disabled in
* this method. These free-running interrupts have very low ("zero") latency,
* but they are not allowed to call any QF services, because QF is unaware
* of them ("QF-unaware" interrutps). Consequently, only interrupts with
* numerical values of priorities eqal to or higher than QF_BASEPRI
* ("QF-aware" interrupts ), can call QF services.
*
* NOTE4:
* The QF_AWARE_ISR_CMSIS_PRI macro is useful as an offset for enumerating
* the "QF-aware" interrupt priorities in the applications, whereas the
* numerical values of the "QF-aware" interrupts must be greater or equal to
* QF_AWARE_ISR_CMSIS_PRI. The values based on QF_AWARE_ISR_CMSIS_PRI can be
* passed directly to the CMSIS function NVIC_SetPriority(), which shifts
* them by (8 - __NVIC_PRIO_BITS) into the correct bit position, while
* __NVIC_PRIO_BITS is the CMSIS macro defining the number of implemented
* priority bits in the NVIC. Please note that the macro QF_AWARE_ISR_CMSIS_PRI
* is intended only for applications and is not used inside the QF port, which
* remains generic and not dependent on the number of implemented priority bits
* implemented in the NVIC.
*
* NOTE5:
* The selective disabling of "QF-aware" interrupts with the BASEPRI register
* has a problem on ARM Cortex-M7 core r0p1 (see ARM-EPM-064408, errata
* 837070). The workaround recommended by ARM is to surround MSR BASEPRI with
* the CPSID i/CPSIE i pair, which is implemented in the QF_INT_DISABLE()
* macro. This workaround works also for Cortex-M3/M4 cores.
*/

#endif /* qf_port_h */