qpc/3rd_party/launchxl2-tms57012/iar/include/reg_gio.h

/** @file reg_gio.h
*   @brief GIO Register Layer Header File
*   @date 02-Mar-2016
*   @version 04.05.02
*
*   This file contains:
*   - Definitions
*   - Types
*   - Interface Prototypes
*   .
*   which are relevant for the GIO driver.
*/

/*
* Copyright (C) 2009-2016 Texas Instruments Incorporated - www.ti.com
*
*
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
*
*    Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/


#ifndef __REG_GIO_H__
#define __REG_GIO_H__

#include "sys_common.h"



/* USER CODE BEGIN (0) */
/* USER CODE END */

/* Gio Register Frame Definition */
/** @struct gioBase
*   @brief GIO Base Register Definition
*
*   This structure is used to access the GIO module registers.
*/
/** @typedef gioBASE_t
*   @brief GIO Register Frame Type Definition
*
*   This type is used to access the GIO Registers.
*/
typedef volatile struct gioBase
{
    uint32 GCR0;      /**< 0x0000: Global Control Register */
    uint32   rsvd;    /**< 0x0004: Reserved*/
    uint32 INTDET;    /**< 0x0008: Interrupt Detect Register*/
    uint32 POL;       /**< 0x000C: Interrupt Polarity Register */
    uint32 ENASET;    /**< 0x0010: Interrupt Enable Set Register */
    uint32 ENACLR;    /**< 0x0014: Interrupt Enable Clear Register */
    uint32 LVLSET;    /**< 0x0018: Interrupt Priority Set Register */
    uint32 LVLCLR;    /**< 0x001C: Interrupt Priority Clear Register */
    uint32 FLG;       /**< 0x0020: Interrupt Flag Register */
    uint32 OFF1;      /**< 0x0024: Interrupt Offset A Register */
    uint32 OFF2;      /**< 0x0028: Interrupt Offset B Register */
    uint32 EMU1;      /**< 0x002C: Emulation 1 Register */
    uint32 EMU2;      /**< 0x0030: Emulation 2 Register */
} gioBASE_t;


/** @struct gioPort
*   @brief GIO Port Register Definition
*/
/** @typedef gioPORT_t
*   @brief GIO Port Register Type Definition
*
*   This type is used to access the GIO Port Registers.
*/
typedef volatile struct gioPort
{
    uint32 DIR;    /**< 0x0000: Data Direction Register */
    uint32 DIN;    /**< 0x0004: Data Input Register */
    uint32 DOUT;   /**< 0x0008: Data Output Register */
    uint32 DSET;   /**< 0x000C: Data Output Set Register */
    uint32 DCLR;   /**< 0x0010: Data Output Clear Register */
    uint32 PDR;    /**< 0x0014: Open Drain Register */
    uint32 PULDIS; /**< 0x0018: Pullup Disable Register */
    uint32 PSL;    /**< 0x001C: Pull Up/Down Selection Register */
} gioPORT_t;


/** @def gioREG
*   @brief GIO Register Frame Pointer
*
*   This pointer is used by the GIO driver to access the gio module registers.
*/
#define gioREG   ((gioBASE_t *)0xFFF7BC00U)

/** @def gioPORTA
*   @brief GIO Port (A) Register Pointer
*
*   Pointer used by the GIO driver to access PORTA
*/
#define gioPORTA ((gioPORT_t *)0xFFF7BC34U)

/** @def gioPORTB
*   @brief GIO Port (B) Register Pointer
*
*   Pointer used by the GIO driver to access PORTB
*/
#define gioPORTB ((gioPORT_t *)0xFFF7BC54U)

/* USER CODE BEGIN (1) */
/* USER CODE END */


#endif