qpc/examples/embos/arm-cm/dpp_stm32f429-discovery/bsp.c

/*****************************************************************************
* Product: "Dining Philosophers Problem" example, embOS kernel
* Last updated for version 5.6.0
* Last updated on  2015-12-18
*
*                    Q u a n t u m     L e a P s
*                    ---------------------------
*                    innovating embedded systems
*
* Copyright (C) Quantum Leaps, LLC. All rights reserved.
*
* This program is open source software: you can redistribute it and/or
* modify it under the terms of the GNU General Public License as published
* by the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* Alternatively, this program may be distributed and modified under the
* terms of Quantum Leaps commercial licenses, which expressly supersede
* the GNU General Public License and are specifically designed for
* licensees interested in retaining the proprietary status of their code.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Contact information:
* https://state-machine.com
* mailto:info@state-machine.com
*****************************************************************************/
#include "qpc.h"
#include "dpp.h"
#include "bsp.h"

#include "stm32f4xx.h"  /* CMSIS-compliant header file for the MCU used */
#include "stm32f4xx_exti.h"
#include "stm32f4xx_gpio.h"
#include "stm32f4xx_rcc.h"
#include "stm32f4xx_usart.h"
/* add other drivers if necessary... */

Q_DEFINE_THIS_FILE

/* Local-scope defines -----------------------------------------------------*/
#define LED_GPIO_PORT     GPIOD
#define LED_GPIO_CLK      RCC_AHB1Periph_GPIOD

#define LED4_PIN          GPIO_Pin_12
#define LED3_PIN          GPIO_Pin_13
#define LED5_PIN          GPIO_Pin_14
#define LED6_PIN          GPIO_Pin_15

#define BTN_GPIO_PORT     GPIOA
#define BTN_GPIO_CLK      RCC_AHB1Periph_GPIOA
#define BTN_B1            GPIO_Pin_0

static uint32_t l_rnd;    /* random seed */

#ifdef Q_SPY
    /* event-source identifiers used for tracing */
    static uint8_t const l_embos_ticker = 0U;

    QSTimeCtr QS_tickTime_;
    QSTimeCtr QS_tickPeriod_;

    enum AppRecords { /* application-specific trace records */
        PHILO_STAT = QS_USER,
        COMMAND_STAT
    };
#endif

/* ISRs used in the application ==========================================*/
#ifdef Q_SPY
/*
* ISR for receiving bytes from the QSPY Back-End
* NOTE: This ISR is "kernel-unaware" meaning that it does not interact with
* the QF/embOS and is not disabled.
*/
void USART2_IRQHandler(void);
void USART2_IRQHandler(void) {
    if ((USART2->SR & USART_SR_RXNE) != 0) {
        uint32_t b = USART2->DR;
        QS_RX_PUT(b);
    }
}
#else
void USART2_IRQHandler(void);
void USART2_IRQHandler(void) {}
#endif

/* embOS application hooks =================================================*/
static void tick_handler(void) {  /* signature of embOS tick hook routine */
    /* state of the button debouncing, see below */
    static struct ButtonsDebouncing {
        uint32_t depressed;
        uint32_t previous;
    } buttons = { 0U, 0U };
    uint32_t current;
    uint32_t tmp;
    static uint_fast8_t ctr = 1U;

#ifdef Q_SPY
    {
        tmp = SysTick->CTRL; /* clear SysTick_CTRL_COUNTFLAG */
        QS_tickTime_ += QS_tickPeriod_; /* account for the clock rollover */
    }
#endif

    /* scale down the 1000Hz embOS tick to the desired BSP_TICKS_PER_SEC */
    if (--ctr == 0U) {
        ctr = 1000U/BSP_TICKS_PER_SEC;
        QF_TICK_X(0U, &l_embos_ticker);

        /* Perform the debouncing of buttons. The algorithm for debouncing
        * adapted from the book "Embedded Systems Dictionary" by Jack Ganssle
        * and Michael Barr, page 71.
        */
        current = BTN_GPIO_PORT->IDR; /* read BTN GPIO */
        tmp = buttons.depressed; /* save the debounced depressed buttons */
        buttons.depressed |= (buttons.previous & current); /* set depressed */
        buttons.depressed &= (buttons.previous | current); /* clear released */
        buttons.previous   = current; /* update the history */
        tmp ^= buttons.depressed;     /* changed debounced depressed */
        if ((tmp & BTN_B1) != 0U) {  /* debounced B1 state changed? */
            if ((buttons.depressed & BTN_B1) != 0U) { /* is B1 depressed? */
                static QEvt const pauseEvt = { PAUSE_SIG, 0U, 0U};
                QF_PUBLISH(&pauseEvt, &l_embos_ticker);
            }
            else {            /* the button is released */
                static QEvt const serveEvt = { SERVE_SIG, 0U, 0U};
                QF_PUBLISH(&serveEvt, &l_embos_ticker);
            }
        }
    }
}
/*..........................................................................*/
/*
*  OS_Idle() function overridden from RTOSInit_STM32F4x_CMSIS.c
*
*  Function description
*    This is basically the "core" of the embOS idle loop.
*    This core loop can be changed, but:
*    The idle loop does not have a stack of its own, therefore no
*    functionality should be implemented that relies on the stack
*    to be preserved. However, a simple program loop can be programmed
*    (like toggling an output or incrementing a counter)
*/
void OS_Idle(void) {
    while (1) {

       /* toggle LED6 on and then off, see NOTE01 */
        QF_INT_DISABLE();
        LED_GPIO_PORT->BSRRL = LED6_PIN; /* turn LED on  */
        __NOP(); /* wait a little to actually see the LED glow */
        __NOP();
        __NOP();
        __NOP();
        LED_GPIO_PORT->BSRRH = LED6_PIN; /* turn LED off */
        QF_INT_ENABLE();

#ifdef Q_SPY
        QS_rxParse();  /* parse all the received bytes */

        if ((USART2->SR & USART_FLAG_TXE) != 0) {  /* is TXE empty? */
            uint16_t b;

            QF_INT_DISABLE();
            b = QS_getByte();
            QF_INT_ENABLE();

            if (b != QS_EOD) {  /* not End-Of-Data? */
                USART2->DR  = (b & 0xFFU);  /* put into the DR register */
            }
        }
#elif defined NDEBUG
        /* Put the CPU and peripherals to the low-power mode.
        * NOTE: You might need to customize the clock management for your
        * application, see the datasheet for your particular Cortex-M3 MCU.
        */
        /* !!!CAUTION!!!
        * The WFI instruction stops the CPU clock, which unfortunately
        * disables the STM32 JTAG port, so the ST-Link debugger can no longer
        * connect to the board. For that reason, the call to __WFI() has to
        * be used with CAUTION. See also NOTE02
        */
#if ((OS_VIEW_IFSELECT != OS_VIEW_IF_JLINK) && (OS_DEBUG == 0))
        //__WFI(); /* Wait-For-Interrupt */
#endif
#endif
    }
}

/* BSP functions ===========================================================*/
void BSP_init(void) {
    GPIO_InitTypeDef GPIO_struct;

    /* NOTE: SystemInit() already called from the startup code
    *  but SystemCoreClock needs to be updated
    */
    SystemCoreClockUpdate();

    /* Explictily Disable the automatic FPU state preservation as well as
    * the FPU lazy stacking
    */
    FPU->FPCCR &= ~((1U << FPU_FPCCR_ASPEN_Pos) | (1U << FPU_FPCCR_LSPEN_Pos));

    /* Initialize thr port for the LEDs */
    RCC_AHB1PeriphClockCmd(LED_GPIO_CLK , ENABLE);

    /* GPIO Configuration for the LEDs... */
    GPIO_struct.GPIO_Mode  = GPIO_Mode_OUT;
    GPIO_struct.GPIO_OType = GPIO_OType_PP;
    GPIO_struct.GPIO_PuPd  = GPIO_PuPd_UP;
    GPIO_struct.GPIO_Speed = GPIO_Speed_50MHz;

    GPIO_struct.GPIO_Pin = LED3_PIN;
    GPIO_Init(LED_GPIO_PORT, &GPIO_struct);
    LED_GPIO_PORT->BSRRH = LED3_PIN; /* turn LED off */

    GPIO_struct.GPIO_Pin = LED4_PIN;
    GPIO_Init(LED_GPIO_PORT, &GPIO_struct);
    LED_GPIO_PORT->BSRRH = LED4_PIN; /* turn LED off */

    GPIO_struct.GPIO_Pin = LED5_PIN;
    GPIO_Init(LED_GPIO_PORT, &GPIO_struct);
    LED_GPIO_PORT->BSRRH = LED5_PIN; /* turn LED off */

    GPIO_struct.GPIO_Pin = LED6_PIN;
    GPIO_Init(LED_GPIO_PORT, &GPIO_struct);
    LED_GPIO_PORT->BSRRH = LED6_PIN; /* turn LED off */

    /* Initialize thr port for Button */
    RCC_AHB1PeriphClockCmd(BTN_GPIO_CLK , ENABLE);

    /* GPIO Configuration for the Button... */
    GPIO_struct.GPIO_Pin   = BTN_B1;
    GPIO_struct.GPIO_Mode  = GPIO_Mode_IN;
    GPIO_struct.GPIO_OType = GPIO_OType_PP;
    GPIO_struct.GPIO_PuPd  = GPIO_PuPd_DOWN;
    GPIO_struct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_Init(BTN_GPIO_PORT, &GPIO_struct);

    /* seed the random number generator */
    BSP_randomSeed(1234U);

    if (QS_INIT((void *)0) == 0U) { /* initialize the QS software tracing */
        Q_ERROR();
    }
    QS_OBJ_DICTIONARY(&l_embos_ticker);
    QS_USR_DICTIONARY(PHILO_STAT);
    QS_USR_DICTIONARY(COMMAND_STAT);
}
/*..........................................................................*/
void BSP_displayPhilStat(uint8_t n, char const *stat) {
    (void)n;

    if (stat[0] == 'h') {
        LED_GPIO_PORT->BSRRL = LED3_PIN; /* turn LED on  */
    }
    else {
        LED_GPIO_PORT->BSRRH = LED3_PIN; /* turn LED off  */
    }
    if (stat[0] == 'e') {
        LED_GPIO_PORT->BSRRL = LED5_PIN; /* turn LED on  */
    }
    else {
        LED_GPIO_PORT->BSRRH = LED5_PIN; /* turn LED on  */
    }

    QS_BEGIN(PHILO_STAT, AO_Philo[n]) /* application-specific record begin */
        QS_U8(1, n);  /* Philosopher number */
        QS_STR(stat); /* Philosopher status */
    QS_END()          /* application-specific record end */
}
/*..........................................................................*/
void BSP_displayPaused(uint8_t paused) {
    if (paused) {
        LED_GPIO_PORT->BSRRL = LED4_PIN; /* turn LED on  */
    }
    else {
        LED_GPIO_PORT->BSRRH = LED4_PIN; /* turn LED on  */
    }
}
/*..........................................................................*/
uint32_t BSP_random(void) { /* a very cheap pseudo-random-number generator */
    uint32_t rnd;

    /* exercise the FPU with some floating point computations */
    /* NOTE: this code can be only called from a task that created with
    * the option OS_TASK_OPT_SAVE_FP.
    */
    float volatile x = 3.1415926F;
    x = x + 2.7182818F;

    /* "Super-Duper" Linear Congruential Generator (LCG)
    * LCG(2^32, 3*7*11*13*23, 0, seed)
    */
    rnd = l_rnd * (3U*7U*11U*13U*23U);
    l_rnd = rnd; /* set for the next time */

    return (rnd >> 8);
}
/*..........................................................................*/
void BSP_randomSeed(uint32_t seed) {
    l_rnd = seed;
}
/*..........................................................................*/
void BSP_terminate(int16_t result) {
    (void)result;
}

/* QF callbacks ============================================================*/
void QF_onStartup(void) {
    static OS_TICK_HOOK tick_hook;
    OS_TICK_AddHook(&tick_hook, &tick_handler);

#ifdef Q_SPY
    NVIC_SetPriority(USART2_IRQn, 0);
    NVIC_EnableIRQ(USART2_IRQn); /* USART2 interrupt used for QS-RX */
#endif
}
/*..........................................................................*/
void QF_onCleanup(void) {
}

/*..........................................................................*/
void Q_onAssert(char const *module, int loc) {
    /*
    * NOTE: add here your application-specific error handling
    */
    (void)module;
    (void)loc;
    QS_ASSERTION(module, loc, (uint32_t)10000U); /* report assertion to QS */
    NVIC_SystemReset();
}

/* QS callbacks ============================================================*/
#ifdef Q_SPY
/*..........................................................................*/
uint8_t QS_onStartup(void const *arg) {
    static uint8_t qsBuf[2*1024]; /* buffer for QS-TX channel */
    static uint8_t qsRxBuf[100];  /* buffer for QS-RX channel */
    GPIO_InitTypeDef GPIO_struct;
    USART_InitTypeDef USART_struct;

    (void)arg; /* avoid the "unused parameter" compiler warning */
    QS_initBuf(qsBuf, sizeof(qsBuf));
    QS_rxInitBuf(qsRxBuf, sizeof(qsRxBuf));

    /* enable peripheral clock for USART2 */
    RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE);

    /* GPIOA clock enable */
    RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_GPIOA, ENABLE);

    /* GPIOA Configuration:  USART2 TX on PA2 and RX on PA3 */
    GPIO_struct.GPIO_Pin = GPIO_Pin_2 | GPIO_Pin_3;
    GPIO_struct.GPIO_Mode = GPIO_Mode_AF;
    GPIO_struct.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_struct.GPIO_OType = GPIO_OType_PP;
    GPIO_struct.GPIO_PuPd = GPIO_PuPd_UP ;
    GPIO_Init(GPIOA, &GPIO_struct);

    /* Connect USART2 pins to AF2 */
    GPIO_PinAFConfig(GPIOA, GPIO_PinSource2, GPIO_AF_USART2); /* TX = PA2 */
    GPIO_PinAFConfig(GPIOA, GPIO_PinSource3, GPIO_AF_USART2); /* RX = PA3 */

    USART_struct.USART_BaudRate = 115200;
    USART_struct.USART_WordLength = USART_WordLength_8b;
    USART_struct.USART_StopBits = USART_StopBits_1;
    USART_struct.USART_Parity = USART_Parity_No;
    USART_struct.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
    USART_struct.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
    USART_Init(USART2, &USART_struct);

    USART_ITConfig(USART2, USART_IT_RXNE, ENABLE); /* enable RX interrupt */
    USART_Cmd(USART2, ENABLE); /* enable USART2 */

    QS_tickPeriod_ = SystemCoreClock / BSP_TICKS_PER_SEC;
    QS_tickTime_ = QS_tickPeriod_; /* to start the timestamp at zero */

    /* setup the QS filters... */
    QS_FILTER_ON(QS_SM_RECORDS); /* state machine records */
    QS_FILTER_ON(QS_AO_RECORDS); /* active object records */
    QS_FILTER_ON(QS_UA_RECORDS); /* all user records */

    return (uint8_t)1; /* return success */
}
/*..........................................................................*/
void QS_onCleanup(void) {
}
/*..........................................................................*/
QSTimeCtr QS_onGetTime(void) {  /* NOTE: invoked with interrupts DISABLED */
    if ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == 0) { /* not set? */
        return QS_tickTime_ - (QSTimeCtr)SysTick->VAL;
    }
    else { /* the rollover occured, but the SysTick_ISR did not run yet */
        return QS_tickTime_ + QS_tickPeriod_ - (QSTimeCtr)SysTick->VAL;
    }
}
/*..........................................................................*/
void QS_onFlush(void) {
    uint16_t b;

    QF_INT_DISABLE();
    while ((b = QS_getByte()) != QS_EOD) { /* while not End-Of-Data... */
        QF_INT_ENABLE();
        while ((USART2->SR & USART_FLAG_TXE) == 0) { /* while TXE not empty */
        }
        USART2->DR = (b & 0xFFU); /* put into the DR register */
        QF_INT_DISABLE();
    }
    QF_INT_ENABLE();
}
/*..........................................................................*/
void QS_onReset(void) {
    NVIC_SystemReset();
}
/*..........................................................................*/
void QS_onCommand(uint8_t cmdId,
                  uint32_t param1, uint32_t param2, uint32_t param3)
{
    void assert_failed(char const *module, int loc);
    (void)cmdId;
    (void)param1;
    (void)param2;
    (void)param3;
    QS_BEGIN(COMMAND_STAT, (void *)1) /* application-specific record begin */
        QS_U8(2, cmdId);
        QS_U32(8, param1);
        QS_U32(8, param2);
        QS_U32(8, param3);
    QS_END()

    if (cmdId == 10U) {
        Q_ERROR();
    }
    else if (cmdId == 11U) {
        assert_failed("QS_onCommand", 123);
    }
}

#endif /* Q_SPY */
/*--------------------------------------------------------------------------*/

/*****************************************************************************
* NOTE01:
* One of the LEDs is used to visualize the idle loop activity. The brightness
* of the LED is proportional to the frequency of invcations of the idle loop.
* Please note that the LED is toggled with interrupts disabled, so no
* interrupt execution time contributes to the brightness of the LED.
*
* NOTE02:
* If you find your board "frozen" like this, strap BOOT0 to VDD and reset
* the board, then connect with ST-Link Utilities and erase the part. The
* trick with BOOT(0) is it gets the part to run the System Loader instead of
* your broken code. When done disconnect BOOT0, and start over.
*/