mirror of
https://github.com/QuantumLeaps/qpc.git
synced 2025-01-21 06:53:11 +08:00
54 lines
2.0 KiB
Plaintext
54 lines
2.0 KiB
Plaintext
About this Example
|
|
==================
|
|
This directory contains the "Dining Philosophers Problem" (DPP) example
|
|
for CMSIS-RTOS RTX application running on the STM32 NUCLEO-L152RE board
|
|
(ARM Cortex-M3). This directory contains portable code that should
|
|
compile with any C compiler for ARM Cortex-M.
|
|
|
|
The sub-directories contain code and project files, which are specific to
|
|
the particular ARM toolchains, such as ARM (MDK-ARM) and IAR.
|
|
|
|
Please refer to the README files in the sub-directories for specific
|
|
instructions how to use and customize the example to your needs.
|
|
|
|
|
|
Support Code for NUCLEO-L152RE Board
|
|
====================================
|
|
The directory qpc\3rd_party\nucleo-l152re contains the CMSIS-compliant
|
|
device code for the STM32L152xx MCUs (ARM Cortex-M3). Please see the
|
|
README.txt file in this folder for more details.
|
|
|
|
|
|
Adjusting the CPU Clock Speed
|
|
=============================
|
|
The current setting is to run at 2MHz from the MSI (internal oscillator),
|
|
but the CPU clock speed can be modified by editing the file
|
|
system_stm32l1xx.c. Ther file system_stm32l1xx_pll.c provides an example
|
|
of clock setting using the PLL driven from the MSE.
|
|
|
|
***
|
|
NOTE:
|
|
The NUCLEO boards have a wide range of possible clock selections, depending
|
|
on the solder bridge configuration. Please see Chapter 5.7 "OSC clock" in
|
|
the STM32 NUCLEO Boards User Manual (ST document UM1724) for more information.
|
|
***
|
|
|
|
|
|
QS Software Tracing Instrumentation
|
|
===================================
|
|
This example provides the "Spy" build configuration, which outputs the QS
|
|
(Quantum Spy) software tracing data through UART2, which is connected to
|
|
the virtual COM port of the ST-Link debugger.
|
|
|
|
The output is generated at 115200 baud rate.
|
|
|
|
Here is an example invocation of the QSPY host application to receive
|
|
the QS data from NUCLEO-L152RE:
|
|
|
|
qspy -cCOM20
|
|
|
|
The actual COM port number might be different on your Windows machine.
|
|
Please check the Device Manager to find the COM port number.
|
|
|
|
|