2021-12-06 14:31:57 -06:00

2663 lines
83 KiB
XML
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.1" language="zh_CN" sourcelanguage="en_US">
<context>
<name>About</name>
<message>
<source>About</source>
<translation>关于</translation>
</message>
<message>
<source>Version %1</source>
<translation>版本%1</translation>
</message>
<message>
<source>Copyright © 2020-%1 %2, released under the MIT License.</source>
<translation>版权所有©2020-%1 %2根据MIT许可证发行。</translation>
</message>
<message>
<source>The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.</source>
<translation>该程序按原样提供,没有任何形式的保证,包括针对特定目的的设计,适销性和适用性的保证。</translation>
</message>
<message>
<source>Contact author</source>
<translation type="vanished">联系作者</translation>
</message>
<message>
<source>Report bug</source>
<translation>反馈问题</translation>
</message>
<message>
<source>Check for updates</source>
<translation type="vanished">检查更新</translation>
</message>
<message>
<source>Documentation</source>
<translation>文献资料</translation>
</message>
<message>
<source>Close</source>
<translation>关闭</translation>
</message>
<message>
<source>Open log file</source>
<translation type="vanished">打开日志文件</translation>
</message>
<message>
<source>Website</source>
<translation>网站</translation>
</message>
<message>
<source>Acknowledgements</source>
<translation>致谢</translation>
</message>
<message>
<source>Make a donation</source>
<translation>进行捐赠</translation>
</message>
</context>
<context>
<name>AccelerometerDelegate</name>
<message>
<source>G Units</source>
<translation type="vanished">G 单位</translation>
</message>
<message>
<source>%1 G MAX</source>
<translation type="vanished">%1 G 最大</translation>
</message>
<message>
<source>%1 G MIN</source>
<translation type="vanished">%1 G 最小</translation>
</message>
<message>
<source>%1 G ACT</source>
<translation type="vanished">%1 G 实际</translation>
</message>
<message>
<source>Reset</source>
<translation type="vanished">重置</translation>
</message>
</context>
<context>
<name>Acknowledgements</name>
<message>
<source>Acknowledgements</source>
<translation>致谢</translation>
</message>
<message>
<source>Close</source>
<translation>关闭</translation>
</message>
</context>
<context>
<name>Application</name>
<message>
<source>Check for updates automatically?</source>
<translation type="vanished">自动检查更新?</translation>
</message>
<message>
<source>Should %1 automatically check for updates? You can always check for updates manually from the &quot;Help&quot; menu</source>
<translation type="vanished">%1是否应该自动检查更新 您始终可以从“关于”对话框中手动检查更新</translation>
</message>
<message>
<source>Drop JSON and CSV files here</source>
<translation type="vanished">拖放JSON和CSV文件</translation>
</message>
</context>
<context>
<name>CSV::Export</name>
<message>
<source>CSV file not open</source>
<translation>CSV文件未打开</translation>
</message>
<message>
<source>Cannot find CSV export file!</source>
<translation>找不到CSV导出的文件</translation>
</message>
<message>
<source>CSV File Error</source>
<translation>CSV文件错误</translation>
</message>
<message>
<source>Cannot open CSV file for writing!</source>
<translation>无法打开CSV文件进行写入</translation>
</message>
</context>
<context>
<name>CSV::Player</name>
<message>
<source>Select CSV file</source>
<translation>选择CSV文件</translation>
</message>
<message>
<source>CSV files</source>
<translation>CSV档案</translation>
</message>
<message>
<source>Invalid configuration for CSV player</source>
<translation>CSV播放器的配置无效</translation>
</message>
<message>
<source>You need to select a JSON map file in order to use this feature</source>
<translation>您需要选择一个JSON映射文件才能使用此功能</translation>
</message>
<message>
<source>Serial port open, do you want to continue?</source>
<translation>串行端口已打开,您要继续吗?</translation>
</message>
<message>
<source>In order to use this feature, its necessary to disconnect from the serial port</source>
<translation>为了使用此功能,必须断开与串行端口的连接</translation>
</message>
<message>
<source>There is an error with the data in the CSV file</source>
<translation>CSV文件中的数据有误</translation>
</message>
<message>
<source>Please verify that the CSV file was created with Serial Studio</source>
<translation>请确认CSV文件是使用Serial Studio创建的</translation>
</message>
<message>
<source>Cannot read CSV file</source>
<translation>无法读取CSV文件</translation>
</message>
<message>
<source>Please check file permissions &amp; location</source>
<translation>请检查文件的权限和位置</translation>
</message>
<message>
<source>Replay of %1</source>
<translation>重播%1</translation>
</message>
</context>
<context>
<name>Console</name>
<message>
<source>No data received so far...</source>
<translation type="vanished">目前未收到任何数据...</translation>
</message>
<message>
<source>Send data to device</source>
<translation type="vanished">发送数据到设备</translation>
</message>
<message>
<source>Echo</source>
<translation type="vanished">回声</translation>
</message>
<message>
<source>Autoscroll</source>
<translation type="vanished">自动滚屏</translation>
</message>
<message>
<source>Show timestamp</source>
<translation type="vanished">显示时间戳</translation>
</message>
<message>
<source>Copy</source>
<translation type="vanished">复制</translation>
</message>
<message>
<source>Clear</source>
<translation type="vanished">删除</translation>
</message>
<message>
<source>Save as</source>
<translation type="vanished">另存为</translation>
</message>
<message>
<source>Select all</source>
<translation type="vanished">全选</translation>
</message>
<message>
<source>No data received so far</source>
<translation type="vanished">目前未收到任何数据</translation>
</message>
<message>
<source>Print</source>
<translation type="vanished">打印</translation>
</message>
<message>
<source>Hide menubar</source>
<translation type="vanished">隐藏菜单栏</translation>
</message>
<message>
<source>Show menubar</source>
<translation type="vanished">显示菜单栏</translation>
</message>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
</context>
<context>
<name>CsvPlayer</name>
<message>
<source>CSV Player</source>
<translation>CSV 播放器</translation>
</message>
<message>
<source>Invalid configuration for CSV player</source>
<translation type="vanished">CSV播放器的配置无效</translation>
</message>
<message>
<source>You need to select a JSON map file in order to use this feature</source>
<translation type="vanished">您需要选择一个JSON映射文件才能使用此功能</translation>
</message>
<message>
<source>Select CSV file</source>
<translation type="vanished">选择CSV文件</translation>
</message>
<message>
<source>CSV files (*.csv)</source>
<translation type="vanished">CSV档案 (*.csv)</translation>
</message>
<message>
<source>Serial port open, do you want to continue?</source>
<translation type="vanished">串行端口已打开,您要继续吗?</translation>
</message>
<message>
<source>In order to use this feature, its necessary to disconnect from the serial port</source>
<translation type="vanished">为了使用此功能,必须断开与串行端口的连接</translation>
</message>
<message>
<source>There is an error with the data in the CSV file</source>
<translation type="vanished">CSV文件中的数据有误</translation>
</message>
<message>
<source>Please verify that the CSV file was created with Serial Studio</source>
<translation type="vanished">请确认CSV文件是使用Serial Studio创建的</translation>
</message>
<message>
<source>Cannot read CSV file</source>
<translation type="vanished">无法读取CSV文件</translation>
</message>
<message>
<source>Please check file permissions &amp; location</source>
<translation type="vanished">请检查文件的权限和位置</translation>
</message>
<message>
<source>Replay of %1</source>
<translation type="vanished">重播%1</translation>
</message>
<message>
<source>CSV files</source>
<translation type="vanished">CSV档案</translation>
</message>
</context>
<context>
<name>Dashboard</name>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
</context>
<context>
<name>DashboardTitle</name>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
</context>
<context>
<name>DataGrid</name>
<message>
<source>View</source>
<translation type="vanished">视图</translation>
</message>
<message>
<source>Horizontal Range</source>
<translation type="vanished">水平范围</translation>
</message>
<message>
<source>Data Groups</source>
<translation type="vanished">资料组</translation>
</message>
<message>
<source>Data Plots</source>
<translation type="vanished">数据图</translation>
</message>
<message>
<source>Data</source>
<translation type="vanished">数据</translation>
</message>
<message>
<source>Points</source>
<translation type="vanished">点数</translation>
</message>
<message>
<source>Scale</source>
<translation type="vanished">乘数</translation>
</message>
</context>
<context>
<name>DeviceManager</name>
<message>
<source>Communication Mode</source>
<translation type="vanished">通讯方式</translation>
</message>
<message>
<source>Auto (JSON from serial device)</source>
<translation type="vanished">自动来自串行设备的JSON</translation>
</message>
<message>
<source>Manual (use JSON map file)</source>
<translation type="vanished">手动使用JSON映射文件</translation>
</message>
<message>
<source>Change map file (%1)</source>
<translation type="vanished">更改地图文件(%1</translation>
</message>
<message>
<source>Select map file</source>
<translation type="vanished">选择地图文件</translation>
</message>
<message>
<source>COM Port</source>
<translation type="vanished">COM端口</translation>
</message>
<message>
<source>Baud Rate</source>
<translation type="vanished">波特率</translation>
</message>
<message>
<source>Data Bits</source>
<translation type="vanished">数据位</translation>
</message>
<message>
<source>Parity</source>
<translation type="vanished">校验位</translation>
</message>
<message>
<source>Stop Bits</source>
<translation type="vanished">停止位</translation>
</message>
<message>
<source>Flow Control</source>
<translation type="vanished">流控位</translation>
</message>
<message>
<source>Language</source>
<translation type="vanished">语言</translation>
</message>
</context>
<context>
<name>Donate</name>
<message>
<source>Donate</source>
<translation>捐赠</translation>
</message>
<message>
<source>Later</source>
<translation>后来</translation>
</message>
<message>
<source>Close</source>
<translation>关闭</translation>
</message>
<message>
<source>Support the development of %1!</source>
<translation>支持发展%1!</translation>
</message>
<message>
<source>Serial Studio is free &amp; open-source software supported by volunteers. Consider donating to support development efforts :)</source>
<translation>Serial Studio是由志愿者支持的免费和开源软件。请考虑捐赠以支持开发工作 :)</translation>
</message>
<message>
<source>You can also support this project by sharing it, reporting bugs and proposing new features!</source>
<translation>你也可以通过分享、报告错误和提出新的功能来支持这个项目!</translation>
</message>
<message>
<source>Don&apos;t annoy me again!</source>
<translation>别再烦我了!</translation>
</message>
</context>
<context>
<name>Downloader</name>
<message>
<source>Updater</source>
<translation>更新器</translation>
</message>
<message>
<source>Downloading updates</source>
<translation>下载更新</translation>
</message>
<message>
<source>Time remaining: 0 minutes</source>
<translation>剩余时间0分钟</translation>
</message>
<message>
<source>Open</source>
<translation>打开</translation>
</message>
<message>
<source>Stop</source>
<translation>停止</translation>
</message>
<message>
<source>Time remaining</source>
<translation>剩余时间</translation>
</message>
<message>
<source>unknown</source>
<translation>未知</translation>
</message>
<message>
<source>Error</source>
<translation>错误</translation>
</message>
<message>
<source>Cannot find downloaded update!</source>
<translation>找不到下载的更新!</translation>
</message>
<message>
<source>Close</source>
<translation>关闭</translation>
</message>
<message>
<source>Download complete!</source>
<translation>下载完成!</translation>
</message>
<message>
<source>The installer will open separately</source>
<translation>安装程序将单独打开</translation>
</message>
<message>
<source>Click &quot;OK&quot; to begin installing the update</source>
<translation>点击“确定”开始安装更新</translation>
</message>
<message>
<source>In order to install the update, you may need to quit the application.</source>
<translation>为了安装更新,您可能需要退出该应用程序。</translation>
</message>
<message>
<source>In order to install the update, you may need to quit the application. This is a mandatory update, exiting now will close the application</source>
<translation>为了安装更新,您可能需要退出该应用程序。 这是强制性更新,现在退出将关闭应用程序</translation>
</message>
<message>
<source>Click the &quot;Open&quot; button to apply the update</source>
<translation>点击“打开”按钮开始更新</translation>
</message>
<message>
<source>Are you sure you want to cancel the download?</source>
<translation>您确定要取消下载吗?</translation>
</message>
<message>
<source>Are you sure you want to cancel the download? This is a mandatory update, exiting now will close the application</source>
<translation>您确定要取消下载吗? 这是强制性更新,现在退出将关闭应用程序</translation>
</message>
<message>
<source>%1 bytes</source>
<translation>%1个字节</translation>
</message>
<message>
<source>%1 KB</source>
<translation></translation>
</message>
<message>
<source>%1 MB</source>
<translation></translation>
</message>
<message>
<source>of</source>
<translation></translation>
</message>
<message>
<source>Downloading Updates</source>
<translation>下载更新</translation>
</message>
<message>
<source>Time Remaining</source>
<translation>剩余时间</translation>
</message>
<message>
<source>Unknown</source>
<translation>未知</translation>
</message>
<message>
<source>about %1 hours</source>
<translation>大约%1小时</translation>
</message>
<message>
<source>about one hour</source>
<translation>大约一小时</translation>
</message>
<message>
<source>%1 minutes</source>
<translation>%1分钟</translation>
</message>
<message>
<source>1 minute</source>
<translation>1分钟</translation>
</message>
<message>
<source>%1 seconds</source>
<translation>%1秒</translation>
</message>
<message>
<source>1 second</source>
<translation>一秒</translation>
</message>
</context>
<context>
<name>Export</name>
<message>
<source>CSV file not open</source>
<translation type="vanished">CSV文件未打开</translation>
</message>
<message>
<source>Cannot find CSV export file!</source>
<translation type="vanished">找不到CSV导出的文件</translation>
</message>
<message>
<source>CSV File Error</source>
<translation type="vanished">CSV文件错误</translation>
</message>
<message>
<source>Cannot open CSV file for writing!</source>
<translation type="vanished">无法打开CSV文件进行写入</translation>
</message>
</context>
<context>
<name>Footer</name>
<message>
<source>Close</source>
<translation>关闭</translation>
</message>
<message>
<source>Add group</source>
<translation>添加组别</translation>
</message>
<message>
<source>Open existing project...</source>
<translation>打开现有的项目...</translation>
</message>
<message>
<source>Create new project</source>
<translation>创建新项目</translation>
</message>
<message>
<source>Apply</source>
<translation>申请</translation>
</message>
<message>
<source>Save</source>
<translation>拯救</translation>
</message>
</context>
<context>
<name>Group</name>
<message>
<source>Invalid</source>
<translation type="vanished">无效</translation>
</message>
</context>
<context>
<name>GyroDelegate</name>
<message>
<source>%1° YAW</source>
<translation type="vanished">%1°偏航角</translation>
</message>
<message>
<source>%1° ROLL</source>
<translation type="vanished">%1°翻滚角</translation>
</message>
<message>
<source>%1° PITCH</source>
<translation type="vanished">%1°俯仰角</translation>
</message>
</context>
<context>
<name>Header</name>
<message>
<source>Project title (required)</source>
<translation>项目名称(必填)</translation>
</message>
<message>
<source>Data separator (default is &apos;,&apos;)</source>
<translation>数据分隔符(默认为&apos;&apos;</translation>
</message>
<message>
<source>Frame start sequence (default is &apos;%1&apos;)</source>
<translation>帧开始顺序(默认为&apos;%1&apos;</translation>
</message>
<message>
<source>Frame end sequence (default is &apos;%1&apos;)</source>
<translation>帧结束序列(默认为&apos;%1&apos;</translation>
</message>
</context>
<context>
<name>IO::Console</name>
<message>
<source>ASCII</source>
<translation>ASCII</translation>
</message>
<message>
<source>HEX</source>
<translation>HEX</translation>
</message>
<message>
<source>No line ending</source>
<translation>无行结尾</translation>
</message>
<message>
<source>New line</source>
<translation>新队</translation>
</message>
<message>
<source>Carriage return</source>
<translation>回车</translation>
</message>
<message>
<source>NL + CR</source>
<translation>新行和回车</translation>
</message>
<message>
<source>Plain text</source>
<translation>纯文本</translation>
</message>
<message>
<source>Hexadecimal</source>
<translation>十六进制</translation>
</message>
<message>
<source>Export console data</source>
<translation>导出控制台数据</translation>
</message>
<message>
<source>Text files</source>
<translation>文字档</translation>
</message>
<message>
<source>File save error</source>
<translation>文件保存错误</translation>
</message>
</context>
<context>
<name>IO::DataSources::Network</name>
<message>
<source>Socket error</source>
<translation type="vanished">套接字错误</translation>
</message>
<message>
<source>IP address lookup error</source>
<translation type="vanished">IP地址查询错误</translation>
</message>
<message>
<source>Network socket error</source>
<translation>网络套接字错误</translation>
</message>
</context>
<context>
<name>IO::DataSources::Serial</name>
<message>
<source>None</source>
<translation>无(None)</translation>
</message>
<message>
<source>No Device</source>
<translation>没有设备</translation>
</message>
<message>
<source>Even</source>
<translation>偶校验(Even)</translation>
</message>
<message>
<source>Odd</source>
<translation>奇校验(Odd)</translation>
</message>
<message>
<source>Space</source>
<translation>校验位总为0(Space)</translation>
</message>
<message>
<source>Mark</source>
<translation>校验位总为1(Mark)</translation>
</message>
<message>
<source>Baud rate registered successfully</source>
<translation>波特率注册成功</translation>
</message>
<message>
<source>Rate &quot;%1&quot; has been added to baud rate list</source>
<translation>速率&quot;%1&quot;已添加到波特率列表中</translation>
</message>
<message>
<source>Select Port</source>
<translation>选择端口</translation>
</message>
<message>
<source>Critical serial port error</source>
<translation type="vanished">严重的串行端口错误</translation>
</message>
<message>
<source>Serial port error</source>
<translation type="vanished">串口错误</translation>
</message>
</context>
<context>
<name>IO::Manager</name>
<message>
<source>Serial port</source>
<translation>选择端口</translation>
</message>
<message>
<source>Network port</source>
<translation>网络端口</translation>
</message>
</context>
<context>
<name>JSON::Editor</name>
<message>
<source>Dataset widgets</source>
<translation>数据集小工具</translation>
</message>
<message>
<source>Accelerometer</source>
<translation>加速器</translation>
</message>
<message>
<source>Gyroscope</source>
<translation>陀螺仪</translation>
</message>
<message>
<source>Map</source>
<translation type="vanished">地图</translation>
</message>
<message>
<source>None</source>
<translation></translation>
</message>
<message>
<source>Gauge</source>
<translation>仪表盘</translation>
</message>
<message>
<source>Bar/level</source>
<translation>酒吧/楼层</translation>
</message>
<message>
<source>Compass</source>
<translation>指南针</translation>
</message>
<message>
<source>New Project</source>
<translation>新项目</translation>
</message>
<message>
<source>Do you want to save your changes?</source>
<translation>你想保存你的改动吗?</translation>
</message>
<message>
<source>You have unsaved modifications in this project!</source>
<translation>你在这个项目中有未保存的修改!</translation>
</message>
<message>
<source>Project error</source>
<translation>项目错误</translation>
</message>
<message>
<source>Project title cannot be empty!</source>
<translation>项目标题不能是空的!</translation>
</message>
<message>
<source>Project error - Group %1</source>
<translation>Project error - Group %1</translation>
</message>
<message>
<source>Group title cannot be empty!</source>
<translation>组的标题不能是空的!</translation>
</message>
<message>
<source>Project error - Group %1, Dataset %2</source>
<translation>项目错误 - 组%1数据集%2</translation>
</message>
<message>
<source>Dataset title cannot be empty!</source>
<translation>数据集的标题不能是空的!</translation>
</message>
<message>
<source>Warning - Group %1, Dataset %2</source>
<translation>警告 - 组 %1, 数据集 %2</translation>
</message>
<message>
<source>Dataset contains duplicate frame index position! Continue?</source>
<translation>数据集包含重复的帧索引位置! 继续吗?</translation>
</message>
<message>
<source>Save JSON project</source>
<translation>保存JSON项目</translation>
</message>
<message>
<source>File open error</source>
<translation>文件打开错误</translation>
</message>
<message>
<source>Select JSON file</source>
<translation>选择JSON映射文件</translation>
</message>
<message>
<source>New Group</source>
<translation>新集团</translation>
</message>
<message>
<source>Delete group &quot;%1&quot;</source>
<translation>删除组&quot;%1&quot;</translation>
</message>
<message>
<source>Are you sure you want to delete this group?</source>
<translation>你确定要删除这个组吗?</translation>
</message>
<message>
<source>Are you sure you want to change the group-level widget?</source>
<translation>你确定你要改变组级小部件吗?</translation>
</message>
<message>
<source>Existing datasets for this group will be deleted</source>
<translation>该组的现有数据集将被删除</translation>
</message>
<message>
<source>Accelerometer %1</source>
<translation>加速器%1</translation>
</message>
<message>
<source>Gyro %1</source>
<translation>陀螺仪 %1</translation>
</message>
<message>
<source>Latitude</source>
<translation>纬度</translation>
</message>
<message>
<source>Longitude</source>
<translation>经度</translation>
</message>
<message>
<source>New dataset</source>
<translation>新的数据集</translation>
</message>
<message>
<source>Delete dataset &quot;%1&quot;</source>
<translation>删除数据集&quot;%1&quot;</translation>
</message>
<message>
<source>Are you sure you want to delete this dataset?</source>
<translation>你确定要删除这个数据集吗?</translation>
</message>
<message>
<source>GPS</source>
<translation>全球定位系统</translation>
</message>
<message>
<source>Multiple data plot</source>
<translation>多个数据图表</translation>
</message>
<message>
<source>Altitude</source>
<translation>海拔</translation>
</message>
</context>
<context>
<name>JSON::Generator</name>
<message>
<source>Select JSON map file</source>
<translation>选择JSON映射文件</translation>
</message>
<message>
<source>JSON files</source>
<translation>JSON文件</translation>
</message>
<message>
<source>JSON parse error</source>
<translation>JSON解析错误</translation>
</message>
<message>
<source>JSON map file loaded successfully!</source>
<translation type="vanished">JSON映射文件已成功加载</translation>
</message>
<message>
<source>File &quot;%1&quot; loaded into memory</source>
<translation type="vanished">文件“%1”已加载到内存中</translation>
</message>
<message>
<source>Cannot read JSON file</source>
<translation>无法读取JSON文件</translation>
</message>
<message>
<source>Please check file permissions &amp; location</source>
<translation>请检查文件的权限和位置</translation>
</message>
<message>
<source>JSON/serial data format mismatch</source>
<translation type="vanished">JSON /串行数据格式不匹配</translation>
</message>
<message>
<source>The format of the received data does not correspond to the selected JSON map file.</source>
<translation type="vanished">接收到的数据格式与所选的JSON映射文件不对应。</translation>
</message>
</context>
<context>
<name>JSONDropArea</name>
<message>
<source>Drop JSON and CSV files here</source>
<translation>拖放JSON和CSV文件</translation>
</message>
</context>
<context>
<name>JsonDatasetDelegate</name>
<message>
<source>Dataset %1 - %2</source>
<translation>数据集 %1 - %2</translation>
</message>
<message>
<source>Title:</source>
<translation>标题:</translation>
</message>
<message>
<source>Sensor reading, uptime, etc...</source>
<translation>传感器读数、正常运行时间等...</translation>
</message>
<message>
<source>Units:</source>
<translation>单位:</translation>
</message>
<message>
<source>Volts, meters, seconds, etc...</source>
<translation>伏特,米,秒,等等...</translation>
</message>
<message>
<source>Frame index:</source>
<translation>框架指数:</translation>
</message>
<message>
<source>Generate graph:</source>
<translation type="vanished">生成图形:</translation>
</message>
<message>
<source>Widget:</source>
<translation>小工具:</translation>
</message>
<message>
<source>Min value:</source>
<translation>最小值:</translation>
</message>
<message>
<source>Max value:</source>
<translation>最大值:</translation>
</message>
<message>
<source>Generate plot:</source>
<translation>生成图形:</translation>
</message>
<message>
<source>Logarithmic plot:</source>
<translation>对数图:</translation>
</message>
<message>
<source>FFT plot:</source>
<translation>FFT图</translation>
</message>
<message>
<source>FFT Samples:</source>
<translation>FFT样本</translation>
</message>
<message>
<source>Alarm level:</source>
<translation>报警水平:</translation>
</message>
<message>
<source>Note:</source>
<translation>注:</translation>
</message>
<message>
<source>The compass widget expects values from 0° to 360°.</source>
<translation>指南针小组件期望的数值为0°到360°。</translation>
</message>
<message>
<source>Display LED:</source>
<translation>显示LED</translation>
</message>
</context>
<context>
<name>JsonEditor</name>
<message>
<source>JSON Editor - %1</source>
<translation>JSON编辑器 - %1</translation>
</message>
<message>
<source>Project title (required)</source>
<translation type="vanished">项目名称(必填)</translation>
</message>
<message>
<source>Data separator (default is &apos;,&apos;)</source>
<translation type="vanished">数据分隔符(默认为&apos;&apos;</translation>
</message>
<message>
<source>Frame start sequence (default is &apos;%1&apos;)</source>
<translation type="vanished">帧开始顺序(默认为&apos;%1&apos;</translation>
</message>
<message>
<source>Frame end sequence (default is &apos;%1&apos;)</source>
<translation type="vanished">帧结束序列(默认为&apos;%1&apos;</translation>
</message>
<message>
<source>Start something awesome</source>
<translation>开始做一些了不起的事情</translation>
</message>
<message>
<source>Click on the &quot;%1&quot; button to begin</source>
<translation type="vanished">点击&quot;%1 &quot;按钮,开始</translation>
</message>
<message>
<source>Close</source>
<translation type="vanished">关闭</translation>
</message>
<message>
<source>Add group</source>
<translation type="vanished">添加组别</translation>
</message>
<message>
<source>Open existing project...</source>
<translation type="vanished">打开现有的项目...</translation>
</message>
<message>
<source>Create new project</source>
<translation type="vanished">创建新项目</translation>
</message>
<message>
<source>Apply</source>
<translation type="vanished">申请</translation>
</message>
<message>
<source>Save</source>
<translation type="vanished">拯救</translation>
</message>
<message>
<source>Click on the &quot;Add group&quot; button to begin</source>
<translation>点击 &quot;添加组 &quot;按钮,开始</translation>
</message>
</context>
<context>
<name>JsonGenerator</name>
<message>
<source>Select JSON map file</source>
<translation type="vanished">选择JSON映射文件</translation>
</message>
<message>
<source>JSON files (*.json)</source>
<translation type="vanished">JSON文件 (*.json)</translation>
</message>
<message>
<source>JSON parse error</source>
<translation type="vanished">JSON解析错误</translation>
</message>
<message>
<source>JSON map file loaded successfully!</source>
<translation type="vanished">JSON映射文件已成功加载</translation>
</message>
<message>
<source>File &quot;%1&quot; loaded into memory</source>
<translation type="vanished">文件“%1”已加载到内存中</translation>
</message>
<message>
<source>Cannot read JSON file</source>
<translation type="vanished">无法读取JSON文件</translation>
</message>
<message>
<source>Please check file permissions &amp; location</source>
<translation type="vanished">请检查文件权限和位置</translation>
</message>
<message>
<source>JSON/serial data format mismatch</source>
<translation type="vanished">JSON /串行数据格式不匹配</translation>
</message>
<message>
<source>The format of the received data does not correspond to the selected JSON map file.</source>
<translation type="vanished">接收到的数据格式与所选的JSON映射文件不对应。</translation>
</message>
<message>
<source>JSON files</source>
<translation type="vanished">JSON文件</translation>
</message>
</context>
<context>
<name>JsonGroupDelegate</name>
<message>
<source>Group %1 - %2</source>
<translation>组别 %1 - %2</translation>
</message>
<message>
<source>Title</source>
<translation>标题</translation>
</message>
<message>
<source>Add dataset</source>
<translation>添加数据集</translation>
</message>
<message>
<source>Note:</source>
<translation>注:</translation>
</message>
<message>
<source>The accelerometer widget expects values in m/s².</source>
<translation>加速器部件希望得到以m/s²为单位的值。</translation>
</message>
<message>
<source>The gyroscope widget expects values in degrees (0° to 360°).</source>
<translation>陀螺仪小组件希望得到以度为单位的值0°到360°</translation>
</message>
</context>
<context>
<name>KLed</name>
<message>
<source>LED on</source>
<comment>Accessible name of a Led whose state is on</comment>
<translation>LED灯亮起</translation>
</message>
<message>
<source>LED off</source>
<comment>Accessible name of a Led whose state is off</comment>
<translation>LED关闭</translation>
</message>
</context>
<context>
<name>MQTT</name>
<message>
<source>Version</source>
<translation>版本</translation>
</message>
<message>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<source>Host</source>
<translation>服务器</translation>
</message>
<message>
<source>Port</source>
<translation>端口</translation>
</message>
<message>
<source>Topic</source>
<translation>话题</translation>
</message>
<message>
<source>MQTT topic</source>
<translation>MQTT主题</translation>
</message>
<message>
<source>User</source>
<translation>用户</translation>
</message>
<message>
<source>MQTT username</source>
<translation>MQTT用户名</translation>
</message>
<message>
<source>Password</source>
<translation>密码</translation>
</message>
<message>
<source>MQTT password</source>
<translation>MQTT密码</translation>
</message>
<message>
<source>DNS lookup</source>
<translation type="vanished">DNS查询</translation>
</message>
<message>
<source>Enter address (e.g. google.com)</source>
<translation type="vanished">输入地址例如baidu.com</translation>
</message>
<message>
<source>Disconnect</source>
<translation>断开</translation>
</message>
<message>
<source>Connect</source>
<translation type="vanished">连接</translation>
</message>
<message>
<source>Advanced setup</source>
<translation>高级设置</translation>
</message>
<message>
<source>Connect to broker</source>
<translation>连接</translation>
</message>
</context>
<context>
<name>MQTT::Client</name>
<message>
<source>Publisher</source>
<translation>著作人</translation>
</message>
<message>
<source>Subscriber</source>
<translation>订阅者</translation>
</message>
<message>
<source>IP address lookup error</source>
<translation>IP地址查询错误</translation>
</message>
<message>
<source>Unknown error</source>
<translation>未知错误</translation>
</message>
<message>
<source>Connection refused</source>
<translation>拒绝连接</translation>
</message>
<message>
<source>Remote host closed the connection</source>
<translation>远程主机关闭连接</translation>
</message>
<message>
<source>Host not found</source>
<translation>未找到主机</translation>
</message>
<message>
<source>Socket access error</source>
<translation>插座访问错误</translation>
</message>
<message>
<source>Socket resource error</source>
<translation>插座资源错误</translation>
</message>
<message>
<source>Socket timeout</source>
<translation>插座超时</translation>
</message>
<message>
<source>Socket datagram too large</source>
<translation>套接字数据包太大</translation>
</message>
<message>
<source>Network error</source>
<translation>网络错误</translation>
</message>
<message>
<source>Address in use</source>
<translation>使用中的地址</translation>
</message>
<message>
<source>Address not available</source>
<translation>地址不详</translation>
</message>
<message>
<source>Unsupported socket operation</source>
<translation>不支持的套接字操作</translation>
</message>
<message>
<source>Unfinished socket operation</source>
<translation>未完成的插座操作</translation>
</message>
<message>
<source>Proxy authentication required</source>
<translation>需要代理认证</translation>
</message>
<message>
<source>SSL handshake failed</source>
<translation>SSL握手失败</translation>
</message>
<message>
<source>Proxy connection refused</source>
<translation>拒绝代理连接</translation>
</message>
<message>
<source>Proxy connection closed</source>
<translation>代理连接关闭</translation>
</message>
<message>
<source>Proxy connection timeout</source>
<translation>代理连接超时</translation>
</message>
<message>
<source>Proxy not found</source>
<translation>未找到代理机构</translation>
</message>
<message>
<source>Proxy protocol error</source>
<translation>代理协议错误</translation>
</message>
<message>
<source>Operation error</source>
<translation>操作错误</translation>
</message>
<message>
<source>SSL internal error</source>
<translation>SSL内部错误</translation>
</message>
<message>
<source>Invalid SSL user data</source>
<translation>无效的SSL用户数据</translation>
</message>
<message>
<source>Socket temprary error</source>
<translation>插座临时错误</translation>
</message>
<message>
<source>Unacceptable MQTT protocol</source>
<translation>不可接受的MQTT协议</translation>
</message>
<message>
<source>MQTT identifier rejected</source>
<translation>MQTT标识符被拒绝</translation>
</message>
<message>
<source>MQTT server unavailable</source>
<translation>MQTT服务器不可用</translation>
</message>
<message>
<source>Bad MQTT username or password</source>
<translation>错误的MQTT用户名或密码</translation>
</message>
<message>
<source>MQTT authorization error</source>
<translation>MQTT授权错误</translation>
</message>
<message>
<source>MQTT no ping response</source>
<translation>MQTT没有PING响应</translation>
</message>
<message>
<source>MQTT client error</source>
<translation>MQTT客户端错误</translation>
</message>
<message>
<source>0: At most once</source>
<translation>0: 最多一次</translation>
</message>
<message>
<source>1: At least once</source>
<translation>1: 至少一次</translation>
</message>
<message>
<source>2: Exactly once</source>
<translation>2正好一次</translation>
</message>
<message>
<source>System default</source>
<translation>系统默认</translation>
</message>
<message>
<source>Select CA file</source>
<translation>选择CA文件</translation>
</message>
<message>
<source>Cannot open CA file!</source>
<translation>无法打开CA文件!</translation>
</message>
<message>
<source>MQTT client SSL/TLS error, ignore?</source>
<translation>MQTT客户端SSL/TLS错误忽略</translation>
</message>
</context>
<context>
<name>MQTTConfiguration</name>
<message>
<source>MQTT Configuration</source>
<translation>MQTT配置</translation>
</message>
<message>
<source>Version</source>
<translation>版本</translation>
</message>
<message>
<source>Mode</source>
<translation>模式</translation>
</message>
<message>
<source>QOS level</source>
<translation>QOS水平</translation>
</message>
<message>
<source>Keep alive (s)</source>
<translation>保持活力的超时s</translation>
</message>
<message>
<source>Host</source>
<translation>服务器</translation>
</message>
<message>
<source>Port</source>
<translation>端口</translation>
</message>
<message>
<source>Topic</source>
<translation>话题</translation>
</message>
<message>
<source>Retain</source>
<translation>保留</translation>
</message>
<message>
<source>MQTT topic</source>
<translation>MQTT主题</translation>
</message>
<message>
<source>Add retain flag</source>
<translation>添加保留标志</translation>
</message>
<message>
<source>User</source>
<translation>用户</translation>
</message>
<message>
<source>Password</source>
<translation>密码</translation>
</message>
<message>
<source>MQTT username</source>
<translation>MQTT用户名</translation>
</message>
<message>
<source>MQTT password</source>
<translation>MQTT密码</translation>
</message>
<message>
<source>Enable SSL/TLS:</source>
<translation>启用SSL/TLS</translation>
</message>
<message>
<source>Certificate:</source>
<translation>证明书:</translation>
</message>
<message>
<source>Use system database</source>
<translation>使用系统数据库</translation>
</message>
<message>
<source>Custom CA file</source>
<translation>选择自定义CA文件</translation>
</message>
<message>
<source>Protocol:</source>
<translation>议定书:</translation>
</message>
<message>
<source>CA file:</source>
<translation>CA文件</translation>
</message>
<message>
<source>Disconnect</source>
<translation>断开</translation>
</message>
<message>
<source>Connect</source>
<translation>连接</translation>
</message>
<message>
<source>Apply</source>
<translation>申请</translation>
</message>
</context>
<context>
<name>MapDelegate</name>
<message>
<source>Center on coordinate</source>
<translation type="vanished">以坐标为中心</translation>
</message>
</context>
<context>
<name>Menubar</name>
<message>
<source>File</source>
<translation>文件</translation>
</message>
<message>
<source>Select JSON file</source>
<translation>选择JSON映射文件</translation>
</message>
<message>
<source>CSV export</source>
<translation>导出CSV</translation>
</message>
<message>
<source>Enable CSV export</source>
<translation>启用CSV导出</translation>
</message>
<message>
<source>Show CSV in explorer</source>
<translation>在资源管理器中显示CSV</translation>
</message>
<message>
<source>Replay CSV</source>
<translation>重播CSV</translation>
</message>
<message>
<source>Export console output</source>
<translation>导出控制台数据</translation>
</message>
<message>
<source>Quit</source>
<translation>辞职</translation>
</message>
<message>
<source>Edit</source>
<translation>编辑</translation>
</message>
<message>
<source>Copy</source>
<translation>复制</translation>
</message>
<message>
<source>Select all</source>
<translation>全选</translation>
</message>
<message>
<source>Clear console output</source>
<translation>清除控制台输出</translation>
</message>
<message>
<source>Communication mode</source>
<translation>通讯方式</translation>
</message>
<message>
<source>Device sends JSON</source>
<translation>设备发送JSON</translation>
</message>
<message>
<source>Load JSON from computer</source>
<translation>从计算机加载JSON</translation>
</message>
<message>
<source>View</source>
<translation>视图</translation>
</message>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
<message>
<source>Dashboard</source>
<translation>仪表盘</translation>
</message>
<message>
<source>Widgets</source>
<translation type="vanished">小部件</translation>
</message>
<message>
<source>Show setup pane</source>
<translation>显示设置窗格</translation>
</message>
<message>
<source>Hide menubar</source>
<translation type="vanished">隐藏菜单栏</translation>
</message>
<message>
<source>Show menubar</source>
<translation type="vanished">显示菜单栏</translation>
</message>
<message>
<source>Exit full screen</source>
<translation>退出全屏</translation>
</message>
<message>
<source>Enter full screen</source>
<translation>进入全屏</translation>
</message>
<message>
<source>Autoscroll</source>
<translation>自动滚屏</translation>
</message>
<message>
<source>Show timestamp</source>
<translation>显示时间戳</translation>
</message>
<message>
<source>VT-100 emulation</source>
<translation>VT-100仿真</translation>
</message>
<message>
<source>Echo user commands</source>
<translation>回显用户命令</translation>
</message>
<message>
<source>Display mode</source>
<translation>可视化模式</translation>
</message>
<message>
<source>Normal (plain text)</source>
<translation>普通(纯文本)</translation>
</message>
<message>
<source>Binary (hexadecimal)</source>
<translation>二进制(十六进制)</translation>
</message>
<message>
<source>Line ending character</source>
<translation>行尾字符</translation>
</message>
<message>
<source>Help</source>
<translation>帮助</translation>
</message>
<message>
<source>About %1</source>
<translation>关于%1</translation>
</message>
<message>
<source>Auto-updater</source>
<translation>自动更新</translation>
</message>
<message>
<source>Check for updates</source>
<translation>检查更新</translation>
</message>
<message>
<source>Project website</source>
<translation>项目网站</translation>
</message>
<message>
<source>Documentation/wiki</source>
<translation>文档/维基</translation>
</message>
<message>
<source>Show log file</source>
<translation type="vanished">打开日志文件</translation>
</message>
<message>
<source>Report bug</source>
<translation>反馈问题</translation>
</message>
<message>
<source>Print</source>
<translation>打印</translation>
</message>
</context>
<context>
<name>MenubarMacOS</name>
<message>
<source>File</source>
<translation>文件</translation>
</message>
<message>
<source>Select JSON file</source>
<translation>选择JSON映射文件</translation>
</message>
<message>
<source>CSV export</source>
<translation>导出CSV</translation>
</message>
<message>
<source>Enable CSV export</source>
<translation>启用CSV导出</translation>
</message>
<message>
<source>Show CSV in explorer</source>
<translation>在资源管理器中显示CSV</translation>
</message>
<message>
<source>Replay CSV</source>
<translation>重播CSV</translation>
</message>
<message>
<source>Export console output</source>
<translation>导出控制台数据</translation>
</message>
<message>
<source>Quit</source>
<translation>辞职</translation>
</message>
<message>
<source>Edit</source>
<translation>编辑</translation>
</message>
<message>
<source>Copy</source>
<translation>复制</translation>
</message>
<message>
<source>Select all</source>
<translation>全选</translation>
</message>
<message>
<source>Clear console output</source>
<translation>清除控制台输出</translation>
</message>
<message>
<source>Communication mode</source>
<translation>VT-100仿真</translation>
</message>
<message>
<source>Device sends JSON</source>
<translation>设备发送JSON</translation>
</message>
<message>
<source>Load JSON from computer</source>
<translation>从计算机加载JSON</translation>
</message>
<message>
<source>View</source>
<translation>视图</translation>
</message>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
<message>
<source>Dashboard</source>
<translation>仪表盘</translation>
</message>
<message>
<source>Widgets</source>
<translation type="vanished">小部件</translation>
</message>
<message>
<source>Show setup pane</source>
<translation>显示设置窗格</translation>
</message>
<message>
<source>Exit full screen</source>
<translation>退出全屏</translation>
</message>
<message>
<source>Enter full screen</source>
<translation>进入全屏</translation>
</message>
<message>
<source>Autoscroll</source>
<translation>自动滚屏</translation>
</message>
<message>
<source>Show timestamp</source>
<translation>显示时间戳</translation>
</message>
<message>
<source>VT-100 emulation</source>
<translation>VT-100仿真</translation>
</message>
<message>
<source>Echo user commands</source>
<translation>回显用户命令</translation>
</message>
<message>
<source>Display mode</source>
<translation>可视化模式</translation>
</message>
<message>
<source>Normal (plain text)</source>
<translation>普通(纯文本)</translation>
</message>
<message>
<source>Binary (hexadecimal)</source>
<translation>二进制(十六进制)</translation>
</message>
<message>
<source>Line ending character</source>
<translation>行尾字符</translation>
</message>
<message>
<source>Help</source>
<translation>帮助</translation>
</message>
<message>
<source>About %1</source>
<translation>关于%1</translation>
</message>
<message>
<source>Auto-updater</source>
<translation>自动更新</translation>
</message>
<message>
<source>Check for updates</source>
<translation>检查更新</translation>
</message>
<message>
<source>Project website</source>
<translation>项目网站</translation>
</message>
<message>
<source>Documentation/wiki</source>
<translation>文档/维基</translation>
</message>
<message>
<source>Show log file</source>
<translation type="vanished">打开日志文件</translation>
</message>
<message>
<source>Report bug</source>
<translation>反馈问题</translation>
</message>
<message>
<source>Print</source>
<translation>打印</translation>
</message>
</context>
<context>
<name>Misc::MacExtras</name>
<message>
<source>Setup</source>
<translation>体系</translation>
</message>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
<message>
<source>Widgets</source>
<translation type="vanished">小部件</translation>
</message>
<message>
<source>Dashboard</source>
<translation>仪表盘</translation>
</message>
</context>
<context>
<name>Misc::ModuleManager</name>
<message>
<source>Initializing...</source>
<translation>初始化...</translation>
</message>
<message>
<source>Configuring updater...</source>
<translation>配置更新器...</translation>
</message>
<message>
<source>Initializing modules...</source>
<translation>初始化模块...</translation>
</message>
<message>
<source>Loading user interface...</source>
<translation>正在加载用户界面...</translation>
</message>
<message>
<source>The rendering engine change will take effect after restart</source>
<translation type="vanished">渲染引擎的改变将在重新启动后生效</translation>
</message>
<message>
<source>Do you want to restart %1 now?</source>
<translation type="vanished">你现在想重新启动%1吗</translation>
</message>
</context>
<context>
<name>Misc::ThemeManager</name>
<message>
<source>The theme change will take effect after restart</source>
<translation>主题变更将在重启后生效</translation>
</message>
<message>
<source>Do you want to restart %1 now?</source>
<translation>你现在想重新启动%1吗</translation>
</message>
</context>
<context>
<name>Misc::Utilities</name>
<message>
<source>Check for updates automatically?</source>
<translation>自动检查更新?</translation>
</message>
<message>
<source>Should %1 automatically check for updates? You can always check for updates manually from the &quot;Help&quot; menu</source>
<translation>%1是否应该自动检查更新 您始终可以从“关于”对话框中手动检查更新</translation>
</message>
</context>
<context>
<name>ModuleManager</name>
<message>
<source>Initializing...</source>
<translation type="vanished">初始化...</translation>
</message>
<message>
<source>Configuring updater...</source>
<translation type="vanished">配置更新器...</translation>
</message>
<message>
<source>Initializing modules...</source>
<translation type="vanished">初始化模块...</translation>
</message>
<message>
<source>Starting timers...</source>
<translation type="vanished">开始计时...</translation>
</message>
<message>
<source>Loading user interface...</source>
<translation type="vanished">正在加载用户界面...</translation>
</message>
<message>
<source>The rendering engine change will take effect after restart</source>
<translation type="vanished">渲染引擎的改变将在重新启动后生效</translation>
</message>
<message>
<source>Do you want to restart %1 now?</source>
<translation type="vanished">你现在想重新启动%1吗</translation>
</message>
</context>
<context>
<name>Network</name>
<message>
<source>Socket type</source>
<translation>插座类型</translation>
</message>
<message>
<source>IP Address</source>
<translation type="vanished">IP地址</translation>
</message>
<message>
<source>Port</source>
<translation>端口</translation>
</message>
<message>
<source>DNS lookup</source>
<translation type="vanished">DNS查询</translation>
</message>
<message>
<source>Enter address (e.g. google.com)</source>
<translation type="vanished">输入地址例如baidu.com</translation>
</message>
<message>
<source>Host</source>
<translation type="vanished">服务器</translation>
</message>
<message>
<source>Multicast</source>
<translation>组播</translation>
</message>
<message>
<source>Remote address</source>
<translation>远程地址</translation>
</message>
<message>
<source>Local port</source>
<translation>本地端口</translation>
</message>
<message>
<source>Type 0 for automatic port</source>
<translation>写0用于自动分配端口</translation>
</message>
<message>
<source>Remote port</source>
<translation>远程端口</translation>
</message>
</context>
<context>
<name>Plugins::Bridge</name>
<message>
<source>Unable to start plugin TCP server</source>
<translation type="vanished">无法启动插件TCP服务器</translation>
</message>
<message>
<source>Plugin server</source>
<translation type="vanished">插件服务器</translation>
</message>
<message>
<source>Invalid pending connection</source>
<translation type="vanished">无效的挂起连接</translation>
</message>
</context>
<context>
<name>Plugins::Server</name>
<message>
<source>Unable to start plugin TCP server</source>
<translation>无法启动插件TCP服务器</translation>
</message>
<message>
<source>Plugin server</source>
<translation>插件服务器</translation>
</message>
<message>
<source>Invalid pending connection</source>
<translation>无效的挂起连接</translation>
</message>
</context>
<context>
<name>QObject</name>
<message>
<source>Failed to load welcome text :(</source>
<translation>无法加载欢迎文本</translation>
</message>
</context>
<context>
<name>QwtPlotRenderer</name>
<message>
<source>Documents</source>
<translation>文件</translation>
</message>
<message>
<source>Images</source>
<translation>图片</translation>
</message>
<message>
<source>Export File Name</source>
<translation>输出文件名</translation>
</message>
</context>
<context>
<name>QwtPolarRenderer</name>
<message>
<source>Documents</source>
<translation>文件</translation>
</message>
<message>
<source>Images</source>
<translation>图片</translation>
</message>
<message>
<source>Export File Name</source>
<translation>输出文件名</translation>
</message>
</context>
<context>
<name>Serial</name>
<message>
<source>COM Port</source>
<translation>COM端口</translation>
</message>
<message>
<source>Baud Rate</source>
<translation>波特率</translation>
</message>
<message>
<source>Data Bits</source>
<translation>数据位</translation>
</message>
<message>
<source>Parity</source>
<translation>校验位</translation>
</message>
<message>
<source>Stop Bits</source>
<translation>停止位</translation>
</message>
<message>
<source>Flow Control</source>
<translation>流控位</translation>
</message>
<message>
<source>Auto-reconnect</source>
<translation>自动重新连接</translation>
</message>
</context>
<context>
<name>SerialManager</name>
<message>
<source>None</source>
<translation type="vanished">无(None)</translation>
</message>
<message>
<source>No Device</source>
<translation type="vanished">没有设备</translation>
</message>
<message>
<source>Received: %1 %2</source>
<translation type="vanished">已接收 %1 %2</translation>
</message>
<message>
<source>Even</source>
<translation type="vanished">偶校验(Even)</translation>
</message>
<message>
<source>Odd</source>
<translation type="vanished">奇校验(Odd)</translation>
</message>
<message>
<source>Space</source>
<translation type="vanished">校验位总为0(Space)</translation>
</message>
<message>
<source>Mark</source>
<translation type="vanished">校验位总为1(Mark)</translation>
</message>
<message>
<source>Select Port</source>
<translation type="vanished">选择端口</translation>
</message>
<message>
<source>Critical serial port error</source>
<translation type="vanished">严重的串行端口错误</translation>
</message>
<message>
<source>Plain text (as it comes)</source>
<translation type="vanished">纯文本(随它而来)</translation>
</message>
<message>
<source>Plain text (remove control characters)</source>
<translation type="vanished">纯文本(删除控制字符)</translation>
</message>
<message>
<source>Hex display</source>
<translation type="vanished">十六进制</translation>
</message>
<message>
<source>As it comes</source>
<translation type="vanished">随它而来</translation>
</message>
<message>
<source>Remove control characters</source>
<translation type="vanished">删除控制字符</translation>
</message>
<message>
<source>Hexadecimal</source>
<translation type="vanished">十六进制</translation>
</message>
<message>
<source>Baud rate registered successfully</source>
<translation type="vanished">波特率注册成功</translation>
</message>
<message>
<source>Rate &quot;%1&quot; has been added to baud rate list</source>
<translation type="vanished">速率&quot;%1&quot;已添加到波特率列表中</translation>
</message>
</context>
<context>
<name>Settings</name>
<message>
<source>Language</source>
<translation>语言</translation>
</message>
<message>
<source>Start sequence</source>
<translation>启动顺序</translation>
</message>
<message>
<source>End sequence</source>
<translation>完成顺序</translation>
</message>
<message>
<source>Plugin system</source>
<translation>插件系统</translation>
</message>
<message>
<source>Applications/plugins can interact with %1 by establishing a TCP connection on port 7777.</source>
<translation>通过在端口7777上建立TCP连接应用程序/插件可以与%1进行交互。</translation>
</message>
<message>
<source>Theme</source>
<translation>主题</translation>
</message>
<message>
<source>Data separator</source>
<translation>数据分离器</translation>
</message>
<message>
<source>UI refresh rate</source>
<translation type="vanished">UI刷新率</translation>
</message>
<message>
<source>Rendering engine</source>
<translation type="vanished">渲染引擎</translation>
</message>
<message>
<source>Threaded frame parsing</source>
<translation type="vanished">多线程框架分析</translation>
</message>
<message>
<source>Multithreaded frame parsing</source>
<translation>多线程框架分析</translation>
</message>
</context>
<context>
<name>Setup</name>
<message>
<source>Communication Mode</source>
<translation>通讯方式</translation>
</message>
<message>
<source>Auto (JSON from serial device)</source>
<translation type="vanished">自动来自串行设备的JSON</translation>
</message>
<message>
<source>Manual (use JSON map file)</source>
<translation type="vanished">手动使用JSON映射文件</translation>
</message>
<message>
<source>Change map file (%1)</source>
<translation type="vanished">更改地图文件(%1</translation>
</message>
<message>
<source>Select map file</source>
<translation type="vanished">选择地图文件</translation>
</message>
<message>
<source>COM Port</source>
<translation type="vanished">COM端口</translation>
</message>
<message>
<source>Baud Rate</source>
<translation type="vanished">波特率</translation>
</message>
<message>
<source>Data Bits</source>
<translation type="vanished">数据位</translation>
</message>
<message>
<source>Parity</source>
<translation type="vanished">校验位</translation>
</message>
<message>
<source>Stop Bits</source>
<translation type="vanished">停止位</translation>
</message>
<message>
<source>Flow Control</source>
<translation type="vanished">流控位</translation>
</message>
<message>
<source>Language</source>
<translation type="vanished">语言</translation>
</message>
<message>
<source>Open mode</source>
<translation type="vanished">开放模式</translation>
</message>
<message>
<source>Read-only</source>
<translation type="vanished">只读</translation>
</message>
<message>
<source>Read/write</source>
<translation type="vanished">读/写</translation>
</message>
<message>
<source>Display mode</source>
<translation type="vanished">可视化模式</translation>
</message>
<message>
<source>Custom baud rate</source>
<translation type="vanished">另一个波特率</translation>
</message>
<message>
<source>CSV Export</source>
<translation type="vanished">导出CSV</translation>
</message>
<message>
<source>CSV Player</source>
<translation type="vanished">CSV 播放器</translation>
</message>
<message>
<source>Create CSV file</source>
<translation>创建CSV文件</translation>
</message>
<message>
<source>Start sequence</source>
<translation type="vanished">启动顺序</translation>
</message>
<message>
<source>End sequence</source>
<translation type="vanished">完成顺序</translation>
</message>
<message>
<source>Serial</source>
<translation>串行端口</translation>
</message>
<message>
<source>Network</source>
<translation>网络</translation>
</message>
<message>
<source>Settings</source>
<translation>设定值</translation>
</message>
<message>
<source>MQTT</source>
<translation>MQTT</translation>
</message>
<message>
<source>Setup</source>
<translation>体系</translation>
</message>
<message>
<source>No parsing (device sends JSON data)</source>
<translation>不进行解析设备发送JSON数据</translation>
</message>
<message>
<source>Parse via JSON project file</source>
<translation>通过JSON项目文件进行解析</translation>
</message>
<message>
<source>Change project file (%1)</source>
<translation>更改项目文件 (%1)</translation>
</message>
<message>
<source>Select project file</source>
<translation>选择项目文件</translation>
</message>
</context>
<context>
<name>Sidebar</name>
<message>
<source>CSV Player</source>
<translation type="obsolete">CSV 播放器</translation>
</message>
<message>
<source>Open CSV</source>
<translation type="obsolete">打开CSV</translation>
</message>
<message>
<source>Log</source>
<translation type="obsolete">日志</translation>
</message>
</context>
<context>
<name>Terminal</name>
<message>
<source>Copy</source>
<translation>复制</translation>
</message>
<message>
<source>Select all</source>
<translation>全选</translation>
</message>
<message>
<source>Clear</source>
<translation>删除</translation>
</message>
<message>
<source>Print</source>
<translation>打印</translation>
</message>
<message>
<source>Save as</source>
<translation>另存为</translation>
</message>
<message>
<source>Hide menubar</source>
<translation type="vanished">隐藏菜单栏</translation>
</message>
<message>
<source>Show menubar</source>
<translation type="vanished">显示菜单栏</translation>
</message>
<message>
<source>No data received so far</source>
<translation>目前未收到任何数据</translation>
</message>
<message>
<source>Send data to device</source>
<translation>发送数据到设备</translation>
</message>
<message>
<source>Echo</source>
<translation>回声</translation>
</message>
<message>
<source>Autoscroll</source>
<translation>自动滚屏</translation>
</message>
<message>
<source>Show timestamp</source>
<translation>显示时间戳</translation>
</message>
</context>
<context>
<name>Toolbar</name>
<message>
<source>Devices</source>
<translation type="vanished">设备</translation>
</message>
<message>
<source>Console</source>
<translation>控制台</translation>
</message>
<message>
<source>Dashboard</source>
<translation>仪表盘</translation>
</message>
<message>
<source>Widgets</source>
<translation type="vanished">小部件</translation>
</message>
<message>
<source>About</source>
<translation type="vanished">关于</translation>
</message>
<message>
<source>CSV Export</source>
<translation type="vanished">导出CSV</translation>
</message>
<message>
<source>Log</source>
<translation type="vanished">日志</translation>
</message>
<message>
<source>CSV Player</source>
<translation type="vanished">CSV 播放器</translation>
</message>
<message>
<source>Open CSV</source>
<translation>打开CSV</translation>
</message>
<message>
<source>Setup</source>
<translation>体系</translation>
</message>
<message>
<source>Disconnect</source>
<translation>断开</translation>
</message>
<message>
<source>Connect</source>
<translation>连接</translation>
</message>
<message>
<source>JSON Editor</source>
<translation>JSON编辑器</translation>
</message>
</context>
<context>
<name>TreeView</name>
<message>
<source>JSON Project Tree</source>
<translation>JSON项目树</translation>
</message>
</context>
<context>
<name>UI::Dashboard</name>
<message>
<source>Status Panel</source>
<translation>状态面板</translation>
</message>
</context>
<context>
<name>UI::WidgetLoader</name>
<message>
<source>Invalid</source>
<translation>无效</translation>
</message>
</context>
<context>
<name>Updater</name>
<message>
<source>Would you like to download the update now?</source>
<translation>您要立即下载更新吗?</translation>
</message>
<message>
<source>Would you like to download the update now? This is a mandatory update, exiting now will close the application</source>
<translation>您要立即下载更新吗? 这是强制性更新,现在退出将关闭应用程序</translation>
</message>
<message>
<source>Version %1 of %2 has been released!</source>
<translation>%2的版本%1已发布</translation>
</message>
<message>
<source>No updates are available for the moment</source>
<translation>目前没有可用的更新</translation>
</message>
<message>
<source>Congratulations! You are running the latest version of %1</source>
<translation>恭喜你! 您正在运行最新版本的%1</translation>
</message>
</context>
<context>
<name>ViewOptions</name>
<message>
<source>View</source>
<translation>视图</translation>
</message>
<message>
<source>Plot divisions (%1)</source>
<translation type="vanished">图形划分 (%1)</translation>
</message>
<message>
<source>Datasets</source>
<translation>数据集</translation>
</message>
<message>
<source>Multiple data plots</source>
<translation>多种数据图表</translation>
</message>
<message>
<source>FFT plots</source>
<translation>FFT图</translation>
</message>
<message>
<source>Data plots</source>
<translation>数据图表</translation>
</message>
<message>
<source>Bars</source>
<translation>酒吧</translation>
</message>
<message>
<source>Gauges</source>
<translation>计量器</translation>
</message>
<message>
<source>Compasses</source>
<translation>指南针</translation>
</message>
<message>
<source>Gyroscopes</source>
<translation>陀螺仪</translation>
</message>
<message>
<source>Accelerometers</source>
<translation>加速器</translation>
</message>
<message>
<source>GPS</source>
<translation>全球定位系统</translation>
</message>
<message>
<source>LED Panels</source>
<translation>LED面板</translation>
</message>
<message>
<source>View options</source>
<translation type="vanished">可视化选项</translation>
</message>
<message>
<source>Points:</source>
<translation>点:</translation>
</message>
<message>
<source>Widgets:</source>
<translation type="vanished">小工具:</translation>
</message>
<message>
<source>Visualization options</source>
<translation>可视化选项</translation>
</message>
<message>
<source>Decimal places:</source>
<translation>小数位:</translation>
</message>
<message>
<source>Widget size:</source>
<translation>小部件大小:</translation>
</message>
</context>
<context>
<name>WidgetGrid</name>
<message>
<source>Data</source>
<translation>数据</translation>
</message>
</context>
<context>
<name>Widgets</name>
<message>
<source>View</source>
<translation type="vanished">视图</translation>
</message>
<message>
<source>Widgets</source>
<translation type="vanished">小部件</translation>
</message>
</context>
<context>
<name>Widgets::FFTPlot</name>
<message>
<source>Samples</source>
<translation>样品</translation>
</message>
<message>
<source>FFT of %1</source>
<translation>%1的FFT</translation>
</message>
</context>
<context>
<name>Widgets::GPS</name>
<message>
<source>Latitude</source>
<translation type="vanished">纬度</translation>
</message>
<message>
<source>Longitude</source>
<translation type="vanished">经度</translation>
</message>
<message>
<source>Altitude</source>
<translation type="vanished">海拔</translation>
</message>
<message>
<source>Loading...</source>
<translation type="vanished">正在加载...</translation>
</message>
<message>
<source>Double-click to open map</source>
<translation type="vanished">双击以打开地图</translation>
</message>
</context>
<context>
<name>Widgets::MultiPlot</name>
<message>
<source>Unknown</source>
<translation>未知</translation>
</message>
<message>
<source>Samples</source>
<translation>样品</translation>
</message>
</context>
<context>
<name>Widgets::Plot</name>
<message>
<source>Samples</source>
<translation>样品</translation>
</message>
</context>
<context>
<name>Widgets::WidgetLoader</name>
<message>
<source>Invalid</source>
<translation type="vanished">无效</translation>
</message>
</context>
<context>
<name>main</name>
<message>
<source>Check for updates automatically?</source>
<translation type="vanished">自动检查更新?</translation>
</message>
<message>
<source>Should %1 automatically check for updates? You can always check for updates manually from the &quot;About&quot; dialog</source>
<translation type="vanished">%1是否应该自动检查更新 您始终可以从“关于”对话框中手动检查更新</translation>
</message>
<message>
<source>Drop *.json and *.csv files here</source>
<translation type="vanished">拖放*.json和*.csv文件</translation>
</message>
<message>
<source>Drop JSON and CSV files here</source>
<translation type="vanished">拖放JSON和CSV文件</translation>
</message>
<message>
<source>Should %1 automatically check for updates? You can always check for updates manually from the &quot;Help&quot; menu</source>
<translation type="vanished">%1是否应该自动检查更新 您始终可以从“关于”对话框中手动检查更新</translation>
</message>
</context>
</TS>